Logosease LGS-RG004 Underwater Comm's
Affiliate link
Print
10956
$999.00


Logosease LGS-RG004 Underwater Comm's
3 Channel 55 metres
- Continuous use for max. 3 hours
- Maximum range for communication is 50 to 100m
- Waterproof for LGS-RG004 is max. 55m depth
- Transmission / Receiving is conducted with ultrasonic wave
- Simple operation: select tapping or hands free (VOX)to change transmitting and receiving mode
- 3 channels
- Voice recorder
- Training mode
Logosease LGS-RG004 Underwater Comm's
Multi-functional, scalable advanced model
Specification
Out package
Colors:
Mat black
Size:
89.0mm x 41.0mm x 44.8mm
Weight:
Approx. 107g
Max.water pressure:
At 55m depth
Temperature in use:
0°C- 40°C
Audio section
Microphone:
Bone conduction microphone
Speaker:
Magnetic-type bone conduction speaker
Communication section
Channels:
3ch (Channel A B and C) *Default is channel A
Frequencies:
(ultrasound wave) Channel A: 32KHz USB
Channel B: 36KHz USB
Channel C: 40KHz LSB
(band frequency) 4KHz,SSB-AM basis
*Channel B and C may interfere each other a bit. but you cannot hear the contents well
Channel B: 36KHz USB
Channel C: 40KHz LSB
(band frequency) 4KHz,SSB-AM basis
*Channel B and C may interfere each other a bit. but you cannot hear the contents well
Antenna:
Ceramic piezoelectric element
Transmission range:
50 - 100m(Channel A)
*face-to-face position in clear and calm sea
*face-to-face position in clear and calm sea
Directionality:
The power of communication will be max. when front side of the antenna of each divers faces each other. It will be min. when they are facing opposite ways.
Display
Turning the unit ON
(Display battery remaining):
(Display battery remaining):
Fully charged: Green blinking
Left enough for 1 more dive: Blue blinking
Need charging: Red blinking
Left enough for 1 more dive: Blue blinking
Need charging: Red blinking
Transmitting mode:
LED light in pink
Receiving mode:
Channel A: Yellow blinking
Channel B: Blue blinking
Channel C: Light blue blinking
Channel B: Blue blinking
Channel C: Light blue blinking
LED while charging:
Red LED is ON
LED after charging:
LED is OFF
Operation Components
Acceleration sensor:
Tap one time in receiving mode, transmitting mode will start
Tap one time in transmitting mode, transmitting will end. (receiving mode starts)
* VOX function (hands-free) can start transmitting mode too.
* With no sound for 3-sec., transmitting mode will change to receiving mode.
Tap one time in transmitting mode, transmitting will end. (receiving mode starts)
* VOX function (hands-free) can start transmitting mode too.
* With no sound for 3-sec., transmitting mode will change to receiving mode.
Recording section
Flash memory:
512MB
Power switch
ON:
Turns on by detecting water
OFF:
Automatically turns off in 1 minute after removed from water
USB
Battery charging:
Required about 2 hours at 500mAh
Battery
Rating:
560mAh with Li-ion battery
Charging method:
by USB
Duration:
About 3 hours (assuming 10% of the time is used for transmitting)
Maintenance:
The manufacturer replaces the Li-ion battery
Other functions
Other functions:
Voice recording
Training mode
Customized tool
Training mode
Customized tool
Accessories
Accessories:
Battery charger x 1, USB cable x 1, Strap x 1, Speech training sheet x 1
Rebate
As a consumer, if you wish to request a quotation for multiple products (variants/quantities) then place your quotation request via My Orders section.